Careclean Bulk CR

Careclean Bulk CR is based on hydrochloric acid.
Careclean Bulk CR is used for the removal of cement, limewash/-stone and other mineral deposits for instance coming from cement cargoes in hold cleaning applications.

• Safe on most coatings
• Removes cement stains without risk to paintwork, coatings etc

• Removal of cement, limestone (carbonates), magnesite & calcium from cargo holds
• Removal of rust stains on coatings and paintwork

Careclean Bulk CR is used to clean cargo holds after cargoes such as cement, limestone (carbonates) and magnesite and to remove any white residues from caustic cleaners or hardness deposits from seawater. After sweeping and demucking apply Careclean Bulk CR in a 10-50% solution depending on the contamination. Let the product soak for 30 minutes making sure not to let the solution dry on the surface. Then spray off with water.

Careclean Bulk CR can be applied with the Caretech Application Kit SU. Since Careclean Bulk CR is very corrosive on metals, ensure to rinse out the pump, hoses and lance with fresh water, inside and outside, after each use.

Drum

• IMO approved in accordance with MEPC guidelines

All our supplied hold cleaning chemicals are IMO approved & comply with the set Marpol MEPC 63/23/add. 1, Annex 24 resolution MEPC.219(63) – Annex V – 2012 guidelines adopted March 2012.

For detailed information on safety and health, please refer to the Material Safety Data Sheet MSDS and/or product label.